Over 30 Years of Energy Efficiency Excellence
The MCD-PIR Movement Controlled Dimmable Lighting System is designed to operate LED or fluorescent analogue 1V to 10V dimming Ballasts or Drivers, maintaining full output during occupancy, then dimming in two stages with 50% output after 5 minutes of non-detection and an additional 40% after a further 2.5 minutes of non-detection, to remain at a constant 10% output. Any time during the time-out movement is detected, the luminaire will switch to 100% output. The MCD-PIR does not have daylight facility and whilst suitable for most areas requiring occupancy control it is especially useful in areas such as Data Centres, where moving equipment could cause nuisance switching with Microwave detection.
This product requires a custom quote. Contact our team for pricing and availability.
.png&w=3840&q=75)
QuoteBorg is the modular tile at the heart of the PIX'L X family. Cubes link edge-to-edge to form walls, columns or freestanding totems and run the same animation engine as the rest of the range, so content moves seamlessly between fixtures.
.png&w=3840&q=75)
QuoteCanvas is the flat PIX'L X display board built for retail walls, reception areas and exhibition stands. Slim chassis, programmable per-pixel, daisy-chained to other PIX'L X fixtures.
.png&w=3840&q=75)
QuoteCorona is the circular PIX'L X surround for ceilings, soffits and architectural niches. Synchronised effects coordinate with neighbouring PIX'L X fixtures across the same controller.
.png&w=3840&q=75)
QuoteHeader Board is the overhead programmable banner in the PIX'L X range. Designed for stadia, conference venues and event spaces where messaging must be visible from a long throw.
